HUNT Proven Carbon Race Enduro 27.5 Wheelset

1837g Width int size
30 mm 27.5

Hard-hitting carbon enduro wheelset a proprietary front and rear carbon layup.

Impact tested in the UK and raced by our professional riders worldwide. Tuned carbon construction, 30mm internal rim width, hand laced to HUNT RapidEngage 5-degree hubs.

Tyre size: Optimized for 2.35" to 2.6" tyres; work well with 2.25" up to 2.8" tyres.

Also available in 29" and Mullet.

The Purpose _

<h1>Rims</h1><i>The re-engineered hookless rim profile of the Proven Race Enduro provides stability and comfort in the roughest of race environments. The rim wall is reinforced for protection against harsh rock strikes, while the 30mm internal width offers maximum support for modern trial and enduro tyres.</i>

The Purpose _

Tailored to maximise traction and accuracy on the unrelenting stages of the Enduro World Series. Tuned for front wheel comfort and precision and rear wheel strength and durability. Developed in the UK and Proven around the globe during the 2022 EWS season under Chloe Taylor and Fergus Ryan.

Proprietary front and rear carbon layup and weave, with specific front and rear spoke gauges for a fully tuned carbon wheel system. What sets Race Enduro apart is the tailored front and rear rim carbon layups, each aimed to offer specific ride properties. The front is tuned for comfort, while the rear can withstand impacts and compressions. All this while providing precise control and reducing fatigue during those long EWS stages.

Full Specs _

Rims
Hookless, 30mm internal rim width, 37.2mm external and 23mm depthFront and rear-specific carbon construction, built for front-wheel compliance and rear-wheel strength.Tubeless-ready – designed to work excellently with tubeless tyres. Tubeless-rim tape and valves included.H-lock bead-seat up-kicks for easy and secure tubeless installation.Available in 29in, 27.5in and Mullet configurations.
  • Hookless, 30mm internal rim width, 37.2mm external and 23mm depth
  • Front and rear-specific carbon construction, built for front-wheel compliance and rear-wheel strength.
  • Tubeless-ready – designed to work excellently with tubeless tyres. Tubeless-rim tape and valves included.
  • H-lock bead-seat up-kicks for easy and secure tubeless installation.
  • Available in 29in, 27.5in and Mullet configurations.
Spokes
J-bend cold drawn.28F/28R spoke count.Front Spokes are Pillar PSR TB2016, with a narrower 1.6mm central butted diameter.Rear Spokes are Pillar PSR 2018 with a larger 1.8mm central diameter.Black stainless treatment.
  • J-bend cold drawn.
  • 28F/28R spoke count.
  • Front Spokes are Pillar PSR TB2016, with a narrower 1.6mm central butted diameter.
  • Rear Spokes are Pillar PSR 2018 with a larger 1.8mm central diameter.
  • Black stainless treatment.
Nipples
Hard-anodized alloy strength.Lightweight DNS (double square nipple) body for external adjustment and hex head for easy internal adjustment/tensioning. Long 16mm thread for durability.14 gauge.Black finish
  • Hard-anodized alloy strength.
  • Lightweight DNS (double square nipple) body for external adjustment and hex head for easy internal adjustment/tensioning.
  • Long 16mm thread for durability.
  • 14 gauge.
  • Black finish
Front Hub
Forged and CNC’d 6061-T6 heat treated aluminium alloy body.110x15mm spacing. Rock Shox Torque Caps for Boost option available - just add a comment in the notes section on the cart page.7075-T6 aluminium alloy axles.6 bolt disc mount.Polished anodized black finish with laser graphics.
  • Forged and CNC’d 6061-T6 heat treated aluminium alloy body.
  • 110x15mm spacing. Rock Shox Torque Caps for Boost option available - just add a comment in the notes section on the cart page.
  • 7075-T6 aluminium alloy axles.
  • 6 bolt disc mount.
  • Polished anodized black finish with laser graphics.
Rear Hub
Forged and CNC’d 7075-T6 heat treated aluminium alloy Hub body.RapidEngage 5 degree, 3x2 freehub for increased resistance to the extra torque generated.H_CERAMIK freehub body reinforcement coating (Shimano/Sram HG body) provides excellent durability and protects against cassette sprocket damage to the freehub often seen on standard alloy freehub bodies.148x12mm spacing (boost) or 157x12mm (Super-Boost)6 bolt disc mount9/10/11 speed Shimano/SRAM compatible freehub, Shimano Microspline and SRAM XD Driver version available.Polished anodized black finish with laser graphics.
  • Forged and CNC’d 7075-T6 heat treated aluminium alloy Hub body.
  • RapidEngage 5 degree, 3x2 freehub for increased resistance to the extra torque generated.
  • H_CERAMIK freehub body reinforcement coating (Shimano/Sram HG body) provides excellent durability and protects against cassette sprocket damage to the freehub often seen on standard alloy freehub bodies.
  • 148x12mm spacing (boost) or 157x12mm (Super-Boost)
  • 6 bolt disc mount
  • 9/10/11 speed Shimano/SRAM compatible freehub, Shimano Microspline and SRAM XD Driver version available.
  • Polished anodized black finish with laser graphics.
Bearings
Super smooth precision REVO bearings.Dual full-contact seals.Cartridge design for convenient servicing.
  • Super smooth precision REVO bearings.
  • Dual full-contact seals.
  • Cartridge design for convenient servicing.
Tyres Info
HUNT recommends a 2.4"-2.6" tyre for best performance, tyre widths between 1.9" and 2.8" are also safe to use.  Note: best performance is usually gained by using tyre pressures lower than the maximum, you can see our blog post about this, read here. Tubeless-ready for lower weight and rolling resistance. Only use tyres marked as compatible with hookless (TSS) rims. You must not exceed the maximum tyre pressure limits set out in the table below or the maximum limit set by your tyre manufacturer if this is lower.  
  • HUNT recommends a 2.4"-2.6" tyre for best performance, tyre widths between 1.9" and 2.8" are also safe to use.  
  • Note: best performance is usually gained by using tyre pressures lower than the maximum, you can see our blog post about this, read here. 
  • Tubeless-ready for lower weight and rolling resistance. 
  • Only use tyres marked as compatible with hookless (TSS) rims. 
  • You must not exceed the maximum tyre pressure limits set out in the table below or the maximum limit set by your tyre manufacturer if this is lower.  
Axle Sizes
Boost - 148x12mm or Super-Boost 157x12mm (Rear) with 110x15mm (Front). Rock Shox Torque Caps available - request in notes at checkout.SRAM/Shimano 8/9/10/11 speed, Shimano Microspline and SRAM XD compatible.
  • Boost - 148x12mm or Super-Boost 157x12mm (Rear) with 110x15mm (Front). Rock Shox Torque Caps available - request in notes at checkout.
  • SRAM/Shimano 8/9/10/11 speed, Shimano Microspline and SRAM XD compatible.

HIGH SPECIFICATION COMPONENTS _

Rims

The re-engineered hookless rim profile of the Proven Race Enduro provides stability and comfort in the roughest of race environments. The rim wall is reinforced for protection against harsh rock strikes, while the 30mm internal width offers maximum support for modern trial and enduro tyre

Spokes

We have chosen top of the line, triple butted Pillar Spokes with increased reinforcement at the spoke head. Not only are these spokes extremely lightweight, they are also able to provide a greater degree of elasticity when put under increased stress. Whatsmore the spokes feature a different gauge front and rear to further enhanced the tuned nature of Race Enduro.

Nipples

Keeping weight to a minimum, we use hard-anodized alloy nipples. Known for their strength and durability, our nipples won't let you down in the middle of a stage and feature square internal and external heads for ease of maintenance and adjustment.

Freehub Body

Available with SRAM XD, Shimano Microspline or HG freehubs.

Bearings

Our precision CNC hubs house double-sealed Revo bearings providing long service intervals. In addition, the free-spinning bearings maintain low levels of friction for an ultra-efficient ride and long life.

Adaptability

Our wheels are seriously future-proof. We can adapt your wheels to any current axle standard on the market, you just need to let us know what are your requirements by filling in the simple form on the confirmation page after checkout.

What's in the box _

  • Black Shield PET high tensile strength tubeless tape fitted to wheels.
  • Freehub fitted
  • 45mm Tubeless Valves
  • Spare of each spoke plus nipples
  • Quality control card signed by your wheel builder

WARRANTY_

These wheels come with H_CARE (Free Lifetime Crash Replacement) for the first owners when used with single crown forks. Read all about it here

A full 3 years from purchase date warranty is offered to the original purchaser only on all Hunt bike wheels against material or workmanship defects, please click here to read full details.

All HUNT wheels models have to pass our harsh rolling-drum fatigue tests for rider weight limits, please see here for more details. Max system weight 135kg (system weight – total weight of fully kitted up rider, bike and luggage). If a rider is over 125Kgs then an experienced bike mechanic should check the wheel regularly.

We've got your back

Rider Experience Support

Unmatched rider support, 7 days a week. For quick and immediate access to all the help you need, try our Live Chat. Our team consists of real bike riders who are fully equipped to answer any questions and help out. See Contact Us page for more details.

Spares Available

Any spares for our wheelsets can be found on our website. If you need assistance, contact us and we can help you.

Next Day Shipping*

If you order your wheels before 3pm, we'll make sure they're sent out the same day.

*If wheels are shown in stock

60 Day Ride and Return

We are so confident that you'll be happy with your Hunt Bike Wheels, that we offer a full 60 days to ride them.

ABOUT HUNT _

HUNT Bike Wheels are a team of talented, passionate riders with a wealth of industry experience, and set out to bring you the latest, most practical, forward-thinking technology in all things round.

Our mission is to serve devoted riders with the highest performing products, backed by best-in-class rider support.

All of our wheels are built and finished by hand, inclusive of a full quality control inspection.