HUNT 4AM Limitless Ti_UD Carbon Spoke Disc Laufradsatz

• 49.5mm deep front rim profile with a 34.2mm external width. 
• 47mm deep rear profile with a 30mm external width. 
• Hooked 23mm internal profile. 
• Compatible tyres ranging from 28-50mm to be fitted including tubeless or clincher tyres in line with ETRTO guidelines. 
• Aerodynamically optimised for a 28-30mm tyre.   
• Unique carbon fibre layup strategy, comprised of T700, T800, T1000 and a high modulus Mitsubishi Pyrofil HR4012M carbon. 
• Pre-formed 3D spoke reinforcement.   
• Designed by HUNT’s in-house Engineering Team using Computational Fluid Dynamics (CFD) and then validated using wind tunnel testing. 
• High gloss finish unidirectional carbon fibre rim. 

• Ti_UD VONOA carbon spokes. 
• 15 front spokes, 2 cross on the rotor side and radial on the drive side. 
• 18 rear spokes, 2 cross on the drive side, 1 cross on the rotor side. 
• Spokes built in a 2:1 lacing pattern. 
• Titanium Ti6-4AL-4V spoke end hardware. 
• Tuned carbon spoke gauges each side to match 2:1 spoke pattern. 

• Aluminium nipple, with a Nyloc insert. 
• Fully serviceable, unlike bonded carbon spoke systems.  
• Internal nipple for truing.  
• Black anodised finish. 

• Chase SLC front hub.   
• CNC machined from 7075-T6 heat-treated aluminium. 
• Hub weight of 90g.  
• 7075-T6 aluminium alloy axle to increase stiffness. 
• Keyed and captive spoke holes lock spokes into place once tensioned. 
• Push-fit endcaps for easy serviceability. 
• Satin gunmetal grey finish. 

• Chase SLC rear hub. 
• CNC machined from 7075-T6 heat-treated aluminium. 
• Hub weight of 199g. 
• H_Ratchet DBL 48T drive system, features two floating star ratchet rings with 48 teeth, to offer a fast 7.5° engagement angle. 
• Zinc-coated ratchet rings to maximise longevity, tested to 100,000 cycles at 250Nm of torque. 
• Keyed and captive spoke holes lock spokes into place once tensioned.  
• Push-fit endcaps for easy serviceability. 
• H_CERAMIK coated alloy freehub body. 
• Satin gunmetal grey finish. 

• Unreleased CeramicSpeed ceramic ball bearings and a new stainless steel bearing race. 
• Custom-made light contact seals. 
• Covered by CeramicSpeed lifetime warranty. 

Or   

• Stainless steel cartridge bearings. 
• Manufactured by TPI. 
• CN clearance to provide the best fitment possible and long bearing life under cycling conditions. 

• HUNT recommends a 28-30mm tyre for best performance, tyre widths between 28mm and 50mm are also safe to use. 
• Tubeless-ready for lower weight and rolling resistance. Also designed to work excellently with standard clincher tyres and inner tubes. 
• You must not exceed the maximum tyre pressure limits set out in the table below or the maximum limit set by your tyre manufacturer if this is lower. 

These wheels are available in the following existing disc brake road bike axle adapter sizes. We fit the axles you need, just complete the simple form shown after checkout:  

Front: 12x100mm Thru-Axle, Quick Release 9x100mm. 

Rear: 12x142mm Thru-Axle, 12x135mm Thru-Axle, 10x135mm Thru-Axle, Quick Release 9x135mm. 

If you're not sure about your axle size, no problem - we’ve got you covered. You can simply provide your bike model after check out, and we’ll identify and fit the correct axle adaptors for you. If it turns out they’re not quite right, we’ll happily replace them at no extra cost. 

Please note: the axle form will appear after you’ve completed your order.