HUNT 62 Carbon Aerodynamicist Wheelset
Depth | Width ext | Width int | size | |
CeramicSpeed Bearings - Limited Stock (£1,349)
Stainless Steel Bearings - Limited Stock (£944.10)Items are selected to ship from us in the week stated. Delivery time is 1 day*
Order by 3pm for Next Day Delivery (if shown in stock). Allow 1-3 days for tyre-fitting.
Our wheels are in high demand, don't miss out.
H_CARE
FREE LIFETIME CRASH REPLACEMENT
To ensure you're not out of pocket should the worst happen. Learn more.
The Purpose _
The Purpose _
Full Specs _
RimsAerodynamicist rim-profiles, developed from the ground up & wind tunnel proven Toray T700/T800 unidirectional and 3K weave carbon-fibre with 3K weave bed and spoke areas. 27mm outer and 19mm inner width 62mm deep super-wide rounded aero section Hooked Tubeless-ready Griptec basalt ceramic fibre brake-track. Please note: We are not able to control other brands brake pad compounds and we cannot test every possible brake pad so please use only our HUNT Brakco Griptec carbon specific rim brake pads with these wheels. Two pairs of pads are included with your wheels and further sets can be ordered from here. We chose the Brakco Griptec pads because they outperform a lot of the market leaders’ best selling compounds in both dry and wet laboratory conditions. Matt black base finished with gloss black and white contrasting graphics.
SpokesPillar Wing 20 with Aerofoil profile 18 front & 24 rear Aero Butted 2.0-2.2/0.95-2.0 then PSR section is 2.2 Straight-pull for excellent torsional strength and direct power transfer Cold drawn from high-grade T302 (18/10) stainless steel wire by Sandvik Sweden Patented Pillar Spoke Re-enforcement, butted again just before the spoke head providing more durability in high stress area. Black stainless treatment
NipplesAlloy square body for external adjustment and square head for easy internal adjustment/tensioning. 16mm length with washer for a strong connection to the spoke added durability. 14 gauge Black anodized finish
Front HubForged and CNC’d 6061-T6 heat treated aluminium alloy body. 7075-T6 aluminium alloy axles. Circular machined dropout interface steps for added stiffness Polished anodized black finish with laser graphics.
Rear Hub7075-T6 heat-treated aluminium alloy freehub body. Steel Spline Insert freehub body reinforcement provides excellent durability against cassette sprocket damage to the freehub often seen on standard alloy freehub bodies. 3x treble tooth pawl engagement for instant acceleration - 7.5 degrees engagement. All freehub standards accounted for. Circular machined dropout interface steps for added stiffness. Forged and CNC’d 6061-T6 heat treated aluminium alloy body. 7075-T6 aluminium alloy axles. Polished anodized black finish with laser graphics.
BearingsIndustry leading CeramicSpeed hybrid ceramic bearings. 3 to 5 times longer than other ceramic bearings on the marketing, and 10 times more than standard steel bearings. CeramicSpeed bearing balls are of the highest quality Grade 3 Silicon Nitride, featuring the highest achievable surface finish and roundness. 15% harder, take 99% higher loads and are more than 100% smoother than other ceramic balls typically seen in the market. The smoothness and the hardness of the CeramicSpeed balls is unique 4 year warranty (When registered with CeramicSpeed)
Tyres InfoHUNT recommends a 25-28mm tyre for best performance, tyre widths between 22mm and 47mm are also safe to use. Note: best performance is usually gained by using tyre pressures lower than the maximum, you can see our blog post about this, read here. Tubeless-ready for lower weight and rolling resistance. You must not exceed the maximum tyre pressure limits set out in the table below or the maximum limit set by your tyre manufacturer if this is lower.
Axle SizesHunt Super-light Race Season design, only 33g front and 37g rear. 7075-T6 heat-treated alloy lever, head and nut. Brass cam plate actuation. 1000kgf tested high-strength cro-moly spindles. Corrosion resistant stainless steel springs. Polished anodized black finish with laser graphics.
What's in the box _
Our riders also bought_
WARRANTY_
We've got your back
ABOUT HUNT _
HUNT Bike Wheels are a team of talented, passionate riders with a wealth of industry experience, and set out to bring you the latest, most practical, forward-thinking technology in all things round.
Our mission is to serve devoted riders with the highest performing products, backed by best-in-class rider support.
All of our wheels are built and finished by hand, inclusive of a full quality control inspection.