MASON x HUNT Search 29 MTB Dynamo Disc Wheelset
Width int | size | |
Wheelset - Limited Stock
Front Only - Limited Stock
Rear Only - Limited StockItems are selected to ship from us in the week stated. Delivery time is 1 day*
We will ask for axle info after checkout.
Order by 3pm for Next Day Delivery (if shown in stock). Allow 1-3 days for tyre-fitting.
Our wheels are in high demand, don't miss out.
The Purpose _
The Purpose _
Full Specs _
Rims30mm internal width. 6069-T6 heat-treated aluminium alloy (+69% tensile strength vs 6061-T6). Tubeless-ready – designed to work best with tubeless tyres. Tubeless-rim tape and valves included. H-lock bead-seat up-kicks for easy and secure tubeless installation. Matt black work-hardened shot-peened finish with laser etched graphics for superior durability.
SpokesJ-bend cold drawn. Made from high grade T302 (18/10) stainless steel wire by Sandvik Sweden. Triple butted 2.0-1.6-2.0 (then 2.2 at the head for the patented Pillar Spoke Re-enforcement). 32 spokes laced 3 cross front and rear. Black stainless treatment.
NipplesBrass for anti-corrosion resistance. Square body for external adjustment and hex head for easy internal adjustment/tensioning. 12mm length. 14 gauge Black finish
Front HubSON 28, 15x110mm boost MTB fitment. 3 watt / 6 volt output at 18-19kmh. Tested to German road traffic regulations (StVZO) standard K687 for output requirement. Efficiency: 65% at 15 km/h in 700c wheel. No-Load Power Input: 0,4 W at 15 km/h in 700c wheel Magnets: neodym iron boron, 26 poles. Connection: 4,8 mm flat spades, 2-pin, to connect without ground connection (special design without connectors). Axle: hollow axle ø10 mm aluminium 7075 T6. Axle Ends: stainless steel. Bearings: deep groove ball bearing 629-2RSH (SKF). Hub Shell: aluminium 6082 T6. Sealing: alloy dust shields, rubber lip seals and pressure compensation system. 6-bolt Disc Mount Warranty: 5 years. Weight 480g.
Rear HubForged and CNC’d 6061-T6 heat treated aluminium alloy Hub body. 148x12mm spacing. Oversized 7075-T6 heat treated aluminium Axles. 7075-T6 heat-treated aluminium alloy freehub body. H_CERAMIK freehub body reinforcement coating (Shimano/Sram HG body) provides excellent durability and protects against cassette sprocket damage to the freehub often seen on standard alloy freehub bodies. 6 individual pawls resulting in just 5 degree engagement angle. All freehub standards accounted for. 7075-T6 aluminium alloy axles. 6-bolt Disc Mount Polished anodized black finish with laser graphics.
BearingsSuper smooth precision bearings with proprietary waterproof grease specially selected for even the worst weather. Sealed cartridge replaceable units. Dual full-contact seals.
Tyres InfoHUNT recommends a 2.35" to 2.6" tyre for best performance, tyre widths between 1.9" and 2.8" are also safe to use. Note: best performance is usually gained by using tyre pressures lower than the maximum, you can see our blog post about this, read here. Tubeless-ready for lower weight and rolling resistance. You must not exceed the maximum tyre pressure limits set out in the table below or the maximum limit set by your tyre manufacturer if this is lower.
Axle SizesDynamo Front Hub | SON 28 Boost (15x110) spacing. Rear Hub | Boost (12x148) spacing
REVIEWS_
Bike Magazine and Websites Expert's Views
What's in the box _
WARRANTY_
We've got your back
ABOUT HUNT _
HUNT Bike Wheels are a team of talented, passionate riders with a wealth of industry experience, and set out to bring you the latest, most practical, forward-thinking technology in all things round.
Our mission is to serve devoted riders with the highest performing products, backed by best-in-class rider support.
All of our wheels are built and finished by hand, inclusive of a full quality control inspection.