HUNT Proven Carbon XC Dynamo Wheelset
Width ext | Width int | size | |
Wheelset - Jan Wk 2
Front Wheel - Jan Wk 2
Rear Wheel - Jan Wk 2Items are selected to ship from us in the week stated. Delivery time is 1 day*
We will ask for axle info after checkout.
Order by 3pm for Next Day Delivery (if shown in stock). Allow 1-3 days for tyre-fitting.
Our wheels are in high demand, don't miss out.
H_CARE
FREE LIFETIME CRASH REPLACEMENT
To ensure you're not out of pocket should the worst happen. Learn more.
The Purpose _
The Purpose _
Full Specs _
Rims30mm internal rim width, 36mm external and 22mm depth Tailored carbon construction with 3K carbon spoke bed reinforcement. Hookless - Tubeless-ready – designed for use with tubeless tyres. Tubeless-rim tape and valves included. H-lock Wedge bead-seat up-kicks for easy and secure tubeless installation. Available in 29" only.
Spokes28 Spoke front and rear in a 3 cross lacing pattern J-bend cold drawn Made from high grade T302 (18/10) stainless steel wire by Sandvik Sweden Triple butted 2.0-1.6-2.0 Black stainless treatment
NipplesDurable brass nipples for corrosion resistance and self-lubricating properties 16mm length for a strong connection to the spoke for added durability Square body for external adjustment and square head for easy internal adjustment/tensioning 14 gauge
Tyres InfoHUNT recommends a 2.25"-2.5" tyre for best performance, tyre widths between 2.0" and 2.8" are also safe to use Note: best performance is usually gained by using tyre pressures lower than the maximum, you can see our blog post about this, read here Tubeless-ready for lower weight and rolling resistance You must not exceed the maximum tyre pressure limits set out in the table below or the maximum limit set by your tyre manufacturer if this is lower
Axle SizesFront: 15x110mm Thru-Axle Rear: 12x148mm Thru-Axle
Front HubSON 28, 15x110mm boost MTB fitment. 3 watt / 6 volt output at 18-19kmh/ 5 volt output at 16kmh Tested to German road traffic regulations (StVZO) standard K687 for output requirement. Efficiency: 65% at 15 km/h in 700c wheel. No-Load Power Input: 0,4 W at 15 km/h in 700c wheel Magnets: neodymium, 26 poles. Connection: 4.8 mm flat spades, 2-pin, to connect without ground connection (special design without connectors). Axle Ends: stainless steel. Bearings: deep groove ball bearing 629-2RSH (SKF). Hub Shell: aluminium 6082-T6. Sealing: alloy dust shields, rubber lip seals and a pressure compensation system which prolongs bearing life by reducing water being drawn in to the hub system 6-bolt Disc Mount Hub warranty: 5 years.
Rear HubCNC machined 6066-T6 heat-treated aluminium alloy hub body J-bend spoke interface 148x12mm Boost design 3x2 pawl, 90 tooth S_RapidEngage freehub, with an engagement angle of just 2 degrees Oversized 7075-T6 heat-treated aluminium axles All freehub standards accounted for. H_CERAMIK freehub body reinforcement coating (Shimano/Sram HG body) provides excellent durability and protects against cassette sprocket damage to the freehub often seen on standard alloy freehub bodies Polished anodized black finish with laser graphics.
BearingsSuper smooth precision stainless steel cartridge bearings. Dual full-contact seals. Cartridge design for convenient servicing.
What's in the box _
Our riders also bought_
WARRANTY_
We've got your back
ABOUT HUNT _
HUNT Bike Wheels are a team of talented, passionate riders with a wealth of industry experience, and set out to bring you the latest, most practical, forward-thinking technology in all things round.
Our mission is to serve devoted riders with the highest performing products, backed by best-in-class rider support.
All of our wheels are built and finished by hand, inclusive of a full quality control inspection.