Hunt Alloy SL Disc Wheelset Hero
Hunt Alloy SL Disc Hero Left
Hunt Alloy SL Disc Hero Right
<h1>Rims</h1><i>A strong and lightweight HFR+ (High Fatigue Resistance) heat-treated alloy rim. The rim profile is asymmetric and disc-specific. The rim dimensions are 25mm deep and 24mm wide (19mm internal) optimised for 25-28mm tyres, but working well for anything 23-45mm.</i>
<h1>Nipples</h1><i>Lightweight, hard-anodised alloy spoke nipples are chosen to accompany the high-end spokes. As well as the standard square body we chose nipples with a hex head so you can achieve precise tensioning.</i>
<h1>Ezo bearings</h1><i> High-grade Japanese EZO bearings. Rear hub upgraded to even faster rolling LU/LB low-friction sealed internal face, dual sealed external face bearings.</i>
<h1>Rim Bed</h1><i>H_LOCK is our tubeless-ready rim bed profile, with up-kicks to the shoulders of the tubeless steps. These help to create an easy initial seal for tubeless tyres. The H_LOCK profile also locks the beads in place more securely once seated, enabling you to run lower pressures without worrying about tyre deformation.</i>
<h1>Freehub Body</h1><i>Featuring a 3 multi-point pawls with 3 teeth each and a 48 tooth ratchet ring results in an impressively low 7.5 degree engagement angle and excellent resistance to wear under heavy loads. The Sprint freehub has strong individual pawl springs which engage quicker. There is also a Steel Spline Insert re-enforcement to provide excellent durability against cassette sprocket damage often seen on standard alloy freehub bodies.</i>
<h1>Spokes</h1><i>Pillar Spoke Re-enforcement PSR XTRA. These aero butted spokes are lighter but also provide a greater degree of elasticity, to maintain spoke tensions longer and add fatigue resistance. These PSR spokes feature the 2.2 width at the spoke head providing more material in this high stress area. Nipples come with a square head for precise tensioning.</i>
<h1>WEIGHT</h1> <i>The consequence of the fanatical attention to detail is an outstandingly light 1443 gram wheelset weight. Gone are the days when having a disc-equipped road bike always resulted in a weight penalty. You can now float up the climbs, and then brake later than the others on the way back down!</i>
35% off
Hunt Alloy SL Disc Wheelset Hero
Hunt Alloy SL Disc Hero Left
Hunt Alloy SL Disc Hero Right
<h1>Rims</h1><i>A strong and lightweight HFR+ (High Fatigue Resistance) heat-treated alloy rim. The rim profile is asymmetric and disc-specific. The rim dimensions are 25mm deep and 24mm wide (19mm internal) optimised for 25-28mm tyres, but working well for anything 23-45mm.</i>
<h1>Nipples</h1><i>Lightweight, hard-anodised alloy spoke nipples are chosen to accompany the high-end spokes. As well as the standard square body we chose nipples with a hex head so you can achieve precise tensioning.</i>
<h1>Ezo bearings</h1><i> High-grade Japanese EZO bearings. Rear hub upgraded to even faster rolling LU/LB low-friction sealed internal face, dual sealed external face bearings.</i>
<h1>Rim Bed</h1><i>H_LOCK is our tubeless-ready rim bed profile, with up-kicks to the shoulders of the tubeless steps. These help to create an easy initial seal for tubeless tyres. The H_LOCK profile also locks the beads in place more securely once seated, enabling you to run lower pressures without worrying about tyre deformation.</i>
<h1>Freehub Body</h1><i>Featuring a 3 multi-point pawls with 3 teeth each and a 48 tooth ratchet ring results in an impressively low 7.5 degree engagement angle and excellent resistance to wear under heavy loads. The Sprint freehub has strong individual pawl springs which engage quicker. There is also a Steel Spline Insert re-enforcement to provide excellent durability against cassette sprocket damage often seen on standard alloy freehub bodies.</i>
<h1>Spokes</h1><i>Pillar Spoke Re-enforcement PSR XTRA. These aero butted spokes are lighter but also provide a greater degree of elasticity, to maintain spoke tensions longer and add fatigue resistance. These PSR spokes feature the 2.2 width at the spoke head providing more material in this high stress area. Nipples come with a square head for precise tensioning.</i>
<h1>WEIGHT</h1> <i>The consequence of the fanatical attention to detail is an outstandingly light 1443 gram wheelset weight. Gone are the days when having a disc-equipped road bike always resulted in a weight penalty. You can now float up the climbs, and then brake later than the others on the way back down!</i>

RE:NEW HUNT Alloy SL Disc Wheelset

After payment & checkout, we will ask for your freehub and axle information via an automatically generated form.

Which freehub do I need?
£309 £479.00
35% off
Finance options available at checkout

Order by 3pm for Next Day Delivery*
Our products are in high demand, don't miss out.

*If shown in stock.

More details Right

SUPERLIGHT AND RESPONSIVE, THE ALLOY SL DISC IS OUR FASTEST ALLOY WHEELSET WHEN THE ROAD HEADS UPHILL.

25 DEEP | 24 WIDE EXT | 19 WIDE INT | 1443G

The Purpose

The Alloy SL Disc is our lightest alloy disc-brake wheelset, offering a level of responsiveness and performance typically reserved for carbon wheels.

The wheelset benefits from a super-light, asymmetric disc-specific rim profile, laced with aero butted, straight-pull spokes to our new Sprint SL hubs, offering 7.5 degree engagement for rapid acceleration under load.

The Purpose

The Alloy SL Disc is our lightest alloy disc-brake wheelset, offering a level of responsiveness and performance typically reserved for carbon wheels.

The wheelset benefits from a super-light, asymmetric disc-specific rim profile, laced with aero butted, straight-pull spokes to our new Sprint SL hubs, offering 7.5 degree engagement for rapid acceleration under load.

Key Features

LIGHT & FAST ALLOY, ENGINEERED TO PERFORM.

  • Rims | 6061-T6 Heat treated. Tubeless-ready. Disc specific. Asymmetric 25mm profile. Micro-peened finish strengthens the surface even further. H_LOCK bead-seat for easy and secure tubeless installation.
  • Tyres | Wide 19mm rim bed creates a wide tyre profile. Great with 23 tyres, ideal for 25, 28 and cross tyres up to 45c. Also work excellently with clincher tyres and tubes.
  • Hubs | Sprint SL straight-pull hubs. 15mm diameter 6066-T6 body and axle for supreme strength-to-weight. Circular dropout interface steps for added security in fitment. 3x treble-tooth pawls, resulting in rapid 7.5˚ engagement. Steel spline protect the cassette body.
  • EZO Bearings | High-grade Japanese EZO bearings. Rear hub upgraded to even faster rolling LU/LB low-friction sealed internal face, dual sealed external face bearings.
  • Axles | Easily adaptable & we fit them for you. Fit all current axle sizes and are easy to change; Front - QR, Bolt thru 12/9mm, Rear - QR, Bolt thru 12x142, 12x135, 10x135.
  • See the full specs here
  • Weight | 1443g

Please note: If you require a 6 bolt adaptor you can purchase separately here

More Tech

  • Rims

    • Tubeless-ready – designed to perform with clincher tyres and tubes or tubeless tyres.
    • HUNT BlackShield tubeless tape fitted.
    • H_LOCK bead-seat up-kicks for easy and secure tubeless installation
    • HFR+ (High Fatigue Resistance) heat-treated alloy.
    • Disc-specific 25mm deep asymmetic profile.
    • 24mm outer and 19mm inner width, ideal for 25-28mm tyres but will work with any tyre from 23-45mm.
    • Laser etched graphics for durability.

  • Spokes

    • 20 front and 24 rear laced 2 cross.
    • Aero Butted 2.0-2.0/0.95-2.0 then PSR section is 2.2.
    • Straight-pull for excellent torsional strength and direct power transfer
    • Cold drawn from high grade T302 (18/10) stainless steel wire by Sandvik Sweden
    • Patented Pillar Spoke Re-enforcement, butted again just before the spoke head providing more durability in high stress area.
    • Black stainless treatment

  • Nipples

    • Lightweight alloy.
    • Square body for external adjustment and hex head for easy internal adjustment/tensioning.
    • 12mm length.
    • 14 gauge.
    • Black anodized finish.

  • Tyres Info

    • Maximum tyre pressure for this rim is 100psi when used with 25-28mm tyres. Maximum tyre pressures for other tyre sizes: 30mm - 32mm do not exceed 70psi, 33mm do not exceed 50psi, 35-45mm do not exceed 45psi, 45-50mm do not exceed 40psi.
    • Maximum tyre pressures for other tyre sizes: 30mm - 32mm do not exceed 70psi, 33mm do not exceed 50psi, 35-45mm do not exceed 45psi, 45-50mm do not exceed 40psi
    • Suitable for tyres from 23mm up to 45mm wide.

  • Axle Size

    • These wheels are compatible with all existing disc-brake road standards. All of our axle adapters are easy to swap, but we'll ensure your wheels arrive ready to fit your bike. After your order checkout is completed, a simple form will show, as well as being sent to you in your confirmation email. The form allows you to select the axle size your bike needs, don't worry it also includes the option to tell us your bike model and we will find out and then fit the correct axles, plus we're happy to change them later at our cost if you don't quite get it right. Please note; this form is shown after you have completed your order. Please click on the Front Hub and Rear Hub tabs to see which sizes are available.

  • Front Hub

    • We fit the axles you need, just complete the simple form shown after checkout:
    • All existing road/CX disc front axle standards are available including:
      • Quick Release (Quick release skewers included)
      • 12mm Bolt Thru
      • 9mm Bolt Thru (uncommon)
    • All axle adapters are also available separately.
    • Forged and CNC’d 6066-T6 heat treated aluminium alloy body.
    • 7075-T6 aluminium alloy axles.
    • Centre-lock disc mount. If you require a 6 bolt adaptor you can purchase separately here.
    • Polished anodized black finish with laser graphics.

  • Rear Hub

    • We fit the axles you need, just complete the simple form shown after checkout.
    • All existing road/CX disc rear axle standards are available including:
      • Quick Release (Quick release skewers included)
      • 12x142 Bolt Thru
      • 12x135 Bolt Thru (uncommon)
      • 10x135 Bolt Thru (uncommon)
    • All axle adapters are also available separately.
    • 7075-T6 heat-treated aluminium alloy freehub body.
    • Steel Spline Insert freehub body reinforcement provides excellent durability against cassette sprocket damage to the freehub often seen on standard alloy freehub bodies.
    • 3x treble-tooth individually leaf sprung pawls with 48 teeth on the ratchet ring for fast 7.5 degree engagement and instant acceleration.
    • All freehub standards accounted for, including:
      • Shimano/SRAM
      • Campagnolo
      • SRAM XD Driver
      • SRAM XDR Driver
    • Forged and CNC’d 6066-T6 heat treated aluminium alloy body.
    • 7075-T6 aluminium alloy axles.
    • Centre-lock disc mount. If you require a 6 bolt adaptor you can purchase separately here.
    • Polished anodized black finish with laser graphics.

  • Bearings

    • High-grade by EZO Japan.
    • Sealed cartridge replaceable units.
    • Rear hub upgraded to even faster rolling S&S LU/LB low-friction sealed internal face, dual sealed external face bearings.

    • Warranty, HUNT Rolling Road Tests & Weight Limits

    A full 3 years from purchase date warranty is offered to the original purchaser only on all Hunt bike wheels against material or workmanship defects, please click here to read full details.

    All HUNT wheels models have to pass our harsh cobbled-rolling-road tests for rider weight limits, please see here for more details. Max system weight 115kg (system weight – total weight of fully kitted up rider, bike and luggage). If a rider is over 100kgs then an experienced bike mechanic should check the wheel regularly and it is advisable to use tyres at max 90psi as this will reduce the fatigue on the wheelset. We are cyclists ourselves and do of course go above and beyond to offer excellent service if you ever do experience any issues. We carry full spares at very reasonable prices and offer complete support.

    60 Day Ride & Return Period. We are certain you'll be impressed by the acceleration, low-weight, speed and durability of our wheels. We are cyclists and as such strive to offer class leading service and support. Buy with confidence, if for any reason you wish to return the wheels for a full refund of your order you can do so up to a full 60 days after you receive them whether they have been ridden or not. Please note we cannot offer refunds on wheels that have suffered from crash damage but do offer a crash replacement discount.

    Our Riders also Bought

    We've got your back

    Rider Experience Support

    Unmatched rider support, 7 days a week. For quick and immediate access to all the help you need, try our Live Chat. Our team consists of real bike riders who are fully equipped to answer any questions and help out. See Contact Us page for more details.

    Spares Available

    Any spares for our wheelsets can be found on our website. If you need assistance, contact us and we can help you.

    Trustpilot

    Next Day Shipping*

    If you order your wheels before 3pm, we'll make sure they're sent out the same day.

    *If wheels are shown in stock

    60 Day Ride and Return

    We are so confident that you'll be happy with your Hunt Bike Wheels, that we offer a full 60 days to ride them.

    ABOUT HUNT _

    HUNT Bike Wheels are a team of talented, passionate riders with a wealth of industry experience, and set out to bring you the latest, most practical, forward-thinking technology in all things round.

    Our mission is to serve devoted riders with the highest performing products, backed by best-in-class rider support.

    All of our wheels are built and finished by hand, inclusive of a full quality control inspection.